Raveon FireLine Ethernet Spécifications télécharger pdf (Page 26)

The second command above sets the Repeat Source to 1000 and the Repeat

Destination to 1000, both with a Mask of FFFF. The FFFF mask means all

digits of the source and destination are used to determine if the transmission

should be repeated. All packets from units with MYID 1000 (

A)sent 1000

will be repeated by this unit. In other words, all transmissions from

A will be

repeated by

To view the Repeater Table, use the ATX command, with no parameter. To

view a single entry in the table, use the ATXn, where n=1, 2, 3, or 4.

To delete an entry in the table so it has no effect on the operation, set the

fields to 0. For example, to disable make entry 1, use the ATX1 0 0 0 0

command.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 63 64

Pas de commentaire

Raveon FireLine Ethernet Spécifications Page 26